Enterprise Networking, Servers


change location Category: Main > Computers/Tablets & Networking > Enterprise Networking, Servers
<< Previous Next >>
Listing ID:31435
[ Seller Info ]

Classified   Views: 42


常規室外光纖都是以松套管作為纖芯的容器, 為最常見光纖纖芯敷設方式;室內光纖常見為緊套式敷設;大芯數光纖的纖芯也有以帶狀方式進行組合敷設光纖纖芯。


1. 光纖的彎曲半徑應至少為光纖外徑的15倍,在施工過程中應至少於為20 倍;

2. 布放光纖時,光纖盤轉動應與布放速度同步,光纖索引的速度一般每分鐘15米;

3. 布放光纖時,光纖出盤處要保持鬆弛的弧度,並保留緩衝的餘量,又不宜過多,避免光纖出現背扣;

4. 光纖在兩端預留長度為5-10米;

5. 敷設光纖時應做好標籤,並填好放線記錄;所有光纖不應外露。

* * * * * *



地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室



What are the requirements for the application of optical fiber?

1. The bend radius of the fiber should be at least 15 times the outer diameter of the fiber and should be at least 20 times during the construction process;

2. When the fiber is laid, the rotation of the fiber tray should be synchronized with the deployment speed. The speed of the fiber index is generally 15 meters per minute.

3. When laying the fiber, keep the arc of the fiber out of the disk and keep the buffering margin, and not too much, to avoid the back buckle of the fiber;

4. The length of the fiber is 5-10 meters at both ends;

5. Label the fiber when laying the fiber and fill in the line record; all fibers should not be exposed.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'What are the requirements for the application of optical fiber?',please visit : http://livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235

Price: $0.00
Listing ID: 31435

;Public Questions - Login Required

Be the first to ask a question about this listing!

Classified Ad Info

<< Previous Next >>